Lintho tse Kopantsoeng tsa C/C kapa tsa Carbon-Carbon Composite

C/C e Kopantsoeng kapa Khabone-Khabone e Kopantsoeng Setšoantšo se Hlahelitsoeng

Tlhaloso e Khutšoanyane:

Re romelle lengolo-tsoibila Khoasolla e le PDF

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Lintho tse Kopantsoeng tsa C/C kapa tsa Carbon-Carbon Composite

Lisebelisoa tsa Carbon Carbon:
Li-composites tsa carbon (li-composites tsa carbon-fiber-reinforced carbon) (CFC) ke mofuta oa thepa e entsoeng ka matla a phahameng a carbon fiber le carbon matrix ka mor'a ts'ebetso ea ntlafatso ea graphitization.

E ka sebelisoa haholo tikolohong ea mocheso o phahameng oa sebopeho se fapaneng, heater le sekepe. Ha ho bapisoa le lisebelisoa tsa khale tsa boenjiniere, motsoako oa carbon carbon o na le melemo e latelang:

1) Matla a phahameng

2) Mocheso o phahameng ho fihlela ho 2000 ℃

3) Ho hanyetsa mocheso oa mocheso

4) Coefficient e tlase ea katoloso ea mocheso

5) Matla a manyenyane a mocheso

6) Ho hanyetsa ha kutu e ntle haholo le ho hanyetsa mahlaseli

Kopo:
1. Sepakapaka. Ka lebaka la thepa e kopantsoeng e na le botsitso bo botle ba mocheso, matla a khethehileng a phahameng le ho satalla. E ka sebelisoa bakeng sa ho etsa mariki a sefofane, mapheo le fuselage, antenna ea sathelaete le sebopeho sa tšehetso, mapheo a letsatsi le khetla, khetla e kholo ea rokete, khetla ea enjine, jj.

2. Indasteri ea likoloi.

3. Lekala la bongaka.

4. Mocheso-insulation

5. Setsi sa ho futhumatsa

6. Ray-insulation

Lintlha tsa Tekheniki tsa Motsoako oa Carbon/Carbon
Index	Yuniti	Boleng
Boima ba bongata	g/cm³	1.40 ~ 1.50
Likahare tsa carbon	%	≥98.5~99.9
Molora	PPM	≤65
Thermal conductivity (1150 ℃)	W/mk	10-30
Matla a tšepe	Mpa	90-130
Flexural Matla	Mpa	100 ~ 150
Matla a hatellang	Mpa	130-170
Matla a ho kuta	Mpa	50-60
Interlaminar Shear matla	Mpa	≥13
Restivity ea motlakase	Ω.mm²/m	30-43
Coefficient ea Katoloso ea Thermal	10⁶/K	0.3 ~ 1.2
Mocheso oa ho sebetsa	℃	≥2400 ℃
Boleng ba sesole, sebopi se felletseng sa mouoane oa lik'hemik'hale, ho roala linale tsa Toray carbon T700 pele ho lohiloeng 3D Litlhaloso tsa lintho tse bonahalang: bophara bo boholo ba kantle ho 2000mm, botenya ba lebota 8-25mm, bolelele ba 1600mm