PriceList for Mocvd Graphite Boat - Graphite Mould for Continuous Casting Graphite Crystallizer – VET Energy

Graphite crystallizer refers to a graphite product used in a continuous casting mold. Metal continuous casting technology is a new technology for directly forming molten metal through a continuous casting mold. Because it is directly formed without rolling, it avoids secondary heating of the metal, so it can save a lot of energy. Compared with other graphite materials, continuous casting graphite is characterized by fine particles, uniform texture, large bulk density, low porosity and high strength.

Material

Application
Gold,silver,copper,precious metal casting

Useful Tips for using ingot molds:

1: Heat the graphite mold to 250c-500c to avoid any damages in the process and for a higher quality result.
Heating temperatures may vary for different materials.
2: Place scrap into graphite crucible, heat graphite crucible until metal reaches a liquefied state.
Pour molted metal into the pre-heated mold.
3: The graphite molds will last several pours depending on temperatures and types of metal that you are casing.
4: If you run into a releasing problem, you may freeze the mold to allow the ingot to release.
Note: these instructions can be used for all size graphite ingot molds.
These molds can be used for casting gold, silver, copper, platinum, aluminum, arsenic, iron, tin…
Warning: molds and metals will be extremely hot .proceed with caution.